Philips lighting 팅 웹사이트를 방문하고 계십니다. 현지 언어 버전을 사용하실 수 있습니다.
제안
    • HID-PrimaVision Xtreme for CPO - Xtreme drivers for the highest reliability

      HID-PV Xt 90 CPO Q 208-277V
      HID-PV Xt 90 CPO Q 208-277V
      PrimaVision Xtreme for CPO

      HID-PV Xt 90 CPO Q 208-277V

      Order code: 913700685566

      Full Product Code: 871829124145400

    Specifications Show all

    General information
    Lamp type
    CPO
    Number of lamps
    1 piece/unit
    Suitable for outdoor use
    Yes
    Number of products on MCB (16 A type B) (nom.)
    5
    Default lamp selected
    CPO90
    Automatic restart
    Yes
    Operating and electrical
    Input Voltage
    208-240-277 V
    Input frequency
    50 to 60 Hz
    Minimum mains voltage operation (min.)
    172 V
    Operating frequency (nom.)
    0.40 kHz
    Power factor 100% load (nom.)
    0.98
    Ignition voltage (max.)
    5 kV
    Ignition switch-off time (nom.)
    20 min
    Mains voltage performance (AC)
    188-305V
    Mains voltage safety (AC)
    160-305V
    Earth leakage current (max.)
    0.7 mA
    Output peak voltage (max.)
    250 V
    Inrush current width
    0.47 ms
    Lamp power tolerance
    -3%/+3%
    Input current (nom.)
    0.49 A
    Inrush current peak (max.)
    52 A
    Efficiency at full load [%]
    91.57 %
    Wiring
    Cable capacity output wires mutual (nom.)
    1000 pF
    Cable length from device to lamp
    10 m
    Wire strip length
    10.0-11.0 mm
    Ballast contact wire cross section
    0.50-2.50 mm²
    Connector type
    WAGO series 804
    System characteristics
    Rated ballast-lamp power
    90 W
    Rated lamp power on CPO
    90 W
    System power on CPO
    98 W
    Lamp power on CPO
    90 W
    Power loss on CPO
    8 W
    Power loss on CPO while dimming
    5.5 W
    Temperature
    T-ambient (max.)
    55 °C
    T-ambient (min.)
    -30 °C
    T storage (max.)
    55 °C
    T storage (min.)
    -30 °C
    T-case lifetime (nom.)
    80 °C
    T-case switch off (min.)
    92 °C
    Controls and dimming
    Programmable lamp settings
    None
    Pre-set integrated controls
    None
    Programmable dimming options
    None
    Control input protection
    Yes (Basic insulation)
    Regulating level
    -
    Mechanical and housing
    Housing
    Q
    Approval and application
    Surge protection (common/differential)
    EN61547 (L-L 2kV, L-G 4kV), 10kV TIL kV
    IP luminaire classification
    34
    Active temperature protection
    Yes
    EMI 9 kHz ... 300 MHz
    CISPR 15 ed 7.2
    EMI 30 MHz ... 1,000 MHz
    CISPR15 Edition 7.2
    Safety standard
    IEC 607, 609, 926, 928  [ No Standard for HID Lamp drivers exists. Requirements in these standards to be used if considered relevant for the product.]
    Quality standard
    ISO 9000:2000
    Environmental standard
    ISO 14001
    Harmonic current emission standard
    IEC 61000-3-2
    Vibration standard
    IEC 68-2-6 Fc (10-150Hz, 2G)
    Bumps standard
    IEC 68-2-29 Eb (10G/16ms)
    Humidity standard
    EN 61347-2-12 clause 11
    Approval marks
    F-Marking
    CE marking
    ENEC certificate
    VDE-EMV certificate
    Humming and noise level
    < 30 dB(A)
    Product data
    Full product code
    871829124145400
    Order product name
    HID-PV Xt 90 CPO Q 208-277V
    EAN/UPC – product
    8718291241454
    Order code
    913700685566
    SAP numerator – quantity per pack
    1
    Numerator – packs per outer box
    12
    SAP material
    913700685566
    Net Weight (Piece)
    0.820 kg
    Installation Diagrams
    Downloads
    Leaflets
    • Leaflet Localized commercial leaflet PDF 1.4 MB
    Visuals
    Brochures

    Recently Viewed

    • Check a product to add
       
    • Check a product to add
       
    • Check a product to add
       
    Check a product to add